Next Working Day Available - Order Before 2pm

100,000+ Successful Projects to Date

Gravel stabilisation grids. Geocell grids with 20mm flint gravel

PolyBrick® Seat Walls

Sezení jako součást zahrady, ne jen přidané do ní

Vestavěné sezení se nepřevrátí, nevyžaduje uskladnění a je vždy tam, kde ho potřebujete. Zídky ze systému PolyBrick® se skládají nasucho, slouží zároveň jako opěrné nebo záhonové stěny a vydrží desítky let.

Proč volit vestavěné sezení

Zahradní nábytek je vždy kompromis. Přesouvá se, stohuje, padá při větru, ukládá se na zimu a každých pár let se vyměňuje. Zídka k sezení je prostě na místě: není třeba ji odkládat, posadí šest lidí stejně snadno jako dva a dodává prostoru pocit promyšleného designu, ne jen vybavenosti.

Navíc svůj záběr využívá dvojnásobně. Zídka kolem terasy zároveň zajišťuje její hranu. Kolem ohniště vymezuje prostor. Podél vyvýšeného záhonu tvoří jeho stěnu. Sezení tak získáte ze struktury, kterou zahrada stejně potřebovala – proto je vestavěné sezení standardem v navrhovaných zahradách a vzácností v těch běžných: obvykle znamená práci zedníka.

PolyBrick to mění. Bloky se spojují zacvaknutím, takže zídka vznikne nasucho za odpoledne. Materiál nehnije, nereziví, neodprýskává a nevyžaduje spárování. Hotová zídka pak nepotřebuje žádnou údržbu.

Kde toto řešení funguje nejlépe

  • Obvodové sezení kolem terasy a zpevněné plochy
  • Ohrazení ohniště a zahradního krbu
  • Zapuštěné posezení
  • Hrany vyvýšených záhonů sloužící zároveň jako lavice
  • Ohrazení jídelního koutku
  • Sezení v atriu a malé zahradě
  • Opěrné a ohradní zídky s horní sedací plochou
  • Komunitní, školní a veřejné zahradní prostory

Přehled parametrů

Montáž Zacvakávací spoj. Bez malty, bez kotevních prvků, bez zedníka
Výška sezení Modulární vrstvy. Postavte na pohodlnou výšku sezení a zakryjte krycí deskou
Dvojí funkce Zároveň zajišťuje hranu terasy, vyvýšeného záhonu nebo výškového rozdílu terénu
Odolnost vůči počasí Nenasákavý materiál. Nedržuje vodu, rychle schne a zůstává použitelný k sezení
Materiál 100% recyklovaný polypropylen, UV stabilizovaný, vyrobeno v EU z recyklovaných polymerů
Únosnost v tlaku Testováno na 150 tun/m² při statickém zatížení
Životnost 25 let v záruce
Údržba Žádná. Bez ošetřování, olejování, lazurování ani zimního uskladnění

Správná výška sezení

To je klíčový parametr celého projektu. Zídka ve špatné výšce je zeď, o kterou se lidé opírají, ne na které sedí.

Cílte přibližně na výšku sedáku jídelní židle. Příliš nízko a vstávání je namáhavé, zejména pro starší osoby; příliš vysoko a nohy visí ve vzduchu, což je nepohodlné během několika minut. Vyplatí se sednout na složené bloky v navrhované výšce ještě před stavbou – ze stejného důvodu, proč si projdete schodiště, než se zavážete k jeho provedení.

Téměř stejně důležitá je hloubka. Sedák musí mít dostatečnou hloubku, aby se na něj pohodlně opřelo celé stehno, jinak lidé jen balancují na okraji. Tam, kde zídka zároveň zadržuje zeminu, bývá konstrukce dostatečně hluboká; u volně stojící zídky stavte širší než na jeden blok.

Nakonec přidejte krycí desku. Hladká horní plocha zajistí čistý a pohodlný okraj bez spáry pod sedící osobou – a právě to je rozdíl mezi zdí, na které se dá sedět, a konstrukcí postavenou jako sezení.

Jak zajistit skutečné pohodlí

Několik detailů rozhoduje o tom, zda sezení lidé skutečně využívají, nebo jen obdivují.

Orientujte pohled na výhled, ne na dům. Nejpoužívanější místo k sezení v každé zahradě je to, které směřuje k něčemu zajímavému a chytá večerní slunce.

Kde je to možné, zabudujte opěradlo. Zídka přiléhající k vyvýšenému záhonu, ohradní zdi nebo svahu má přirozené opěradlo. Volně stojící zídka je lavice bez opěradla – vhodná na dvacet minut, unavující na celý večer.

Ponechte průchozí prostor. Sezení kolem stolu potřebuje za sebou místo pro odsunuté židle a procházející osoby; sezení těsně přisunuté ke stolu je spíše dekorativní než funkční.

Polštáře vše změní. Venkovní polštáře promění tvrdý sedák v pohodlný. Protože povrch nenasákává vodu, rychle schne a polštáře lze po dešti vrátit ven dříve.

How it goes together

  1. Set out the seating and check it against how the space is actually used: where the sun falls in the evening, where the table goes, where people walk through.
  2. Mock the height up before committing. Stack blocks loose, sit on them, and adjust. It takes five minutes and it is the difference between seating that gets used and seating that does not.
  3. Excavate along the line to firm subsoil, removing soft or made ground.
  4. Prepare the foundation: compacted and screeded dead level. The first course sets everything above it, and a seat wall that is not level will be visible along its whole length.
  5. Lay the first course and check level along the run and across the width.
  6. Build up in courses to your sitting height, staggering the joints between courses.
  7. Where the wall retains soil or a level change behind it, backfill with clean angular stone rather than the excavated soil, and drain the base of that stone.
  8. Cap the top course to give a clean, comfortable seat edge.

Seating that retains

The most useful seat walls are doing two jobs, and it is worth designing for both from the start.

A wall along the edge of a raised terrace holds the terrace up and gives you seating facing back into the garden. A wall around a sunken seating area retains the surrounding ground and encloses the space. A raised bed at seat height puts planting directly behind whoever is sitting, which is a very pleasant thing to sit in front of.

Where the wall is retaining anything, treat it as a retaining structure first and seating second: firm foundation, free-draining backfill, drainage at the base. The seating is what you get on top of doing that properly.

For anything more than a low retained height, or where the wall is holding back a significant bank, take engineering advice and have it designed.

Fire pit and dining surrounds

A ring or square of seating around a fire pit is one of the most-used structures anyone builds in a garden, and the geometry is worth thinking about.

Set the seating further back from the fire than feels right on paper; people move closer when it is cold and cannot move away when it is hot. Leave gaps in the run for getting in and out, rather than a continuous enclosure everyone has to climb over.

Keep the blockwork itself away from direct flame and heat. This is a plastic product: it should form the seating and the surround, with the fire itself contained in a proper firebowl, pit liner or masonry hearth with a sensible separation between the two.

Get it right first time

The one thing worth knowing: sit on it before you build it.

Seat height is a few centimetres either way, and those few centimetres decide whether the seating is comfortable for an evening or awkward after ten minutes. It is almost impossible to judge from a drawing and completely obvious the moment you sit down.

Because the blocks build dry, you can stack the height loose, sit on it, get up from it a few times, and adjust before anything is permanent. Nobody does this and everybody should. It is the single biggest determinant of whether the seating gets used.

Ask our engineer

Questions about seat heights, retaining a terrace edge or planning a seating layout? Ask below, or get in touch directly.

Common Questions

Things that frequently come up when carrying out this project.
What height should a garden seat wall be?

Roughly the height of a dining chair seat. Too low and getting up is hard work, particularly for anyone older; too high and feet dangle, which is uncomfortable within minutes.

Because the blocks build dry, stack the height loose and sit on it before committing. Seat height is a few centimetres either way and those centimetres decide whether it gets used.

How deep does a seat wall need to be?

Enough front to back for a whole thigh to land, or people perch rather than sit. Where the wall also retains soil behind it, the structure is usually deep enough anyway.

Where it is freestanding, build it wider than a single block run and cap the top for a clean, comfortable edge with no joint line to sit on.

Can a seat wall also retain a raised terrace or bed?

That is the best use of one. A wall along a raised terrace holds the terrace and gives seating facing back into the garden, and a raised bed at seat height puts planting directly behind whoever is sitting.

Where the wall retains anything, treat it as a retaining structure first: firm foundation, free-draining backfill, drainage at the base. For anything more than a low retained height, take engineering advice.

Is it comfortable to sit on?

Capped and built to the right height and depth, yes, and outdoor cushions transform it further.

Because the surface is non-absorbent it does not soak up rain, so it dries quickly after a shower and cushions go back out sooner than they would on timber or stone.

Can I build seating around a fire pit?

Yes, and it is one of the most-used structures anyone builds in a garden. Set the seating further back than feels right on paper, since people move closer when cold and cannot move away when hot, and leave gaps for getting in and out.

Keep the blockwork away from direct flame and heat: this is a plastic product, so contain the fire in a proper firebowl, pit liner or masonry hearth with sensible separation.

Why build seating in rather than buying furniture?

Built-in seating does not blow over, need storing for winter or get replaced every few years, and it seats six as easily as two. It also earns its footprint twice, since a seat wall around a terrace is retaining the edge and a bed wall at seat height is doing both jobs at once.

Built-in seating is standard in designed gardens and rare in ordinary ones mainly because it usually means a bricklayer.

Does a seat wall need maintenance?

No. There is nothing to rot, rust, spall or repoint, no annual oiling or staining, and nothing to store over winter.

The material is UV stabilised recycled polypropylene and carries a 25 year warranty.

What foundation does a seat wall need?

Excavated to firm subsoil, compacted and screeded dead level. The first course sets everything above it, and a seat wall out of level is visible along its whole length.

What the foundation should consist of depends on the height and on whether the wall is retaining anything, so establish it for your site.

Should seating have a back?

Where you can, yes. A seat wall against a raised bed, a boundary wall or a bank has a natural backrest.

Freestanding it is a bench without one, which is fine for twenty minutes and tiring for a whole evening, so site the main seating where something can serve as a back.