Dalles Stabilisatrices IBRAN - le Choix des Professionnels.
Accédez à une capacité portante inégalée et une facilité et rapidité d'installation. Les dalles stabilisatrices IBRAN sont votre solution idéale pour les allées en gravier, les voies d'accès d'urgence ou autres surfaces en gravier stabilisé renforcées.
Créez une surface nette et robuste avec une dalle stabilisatrice sur laquelle vous pouvez conduire n'importe quel véhicule. Nous utilisons uniquement du plastique 100% recyclé (PP+HDPE) respectueux de l'environnement pour résister à toutes les conditions climatiques sans devenir cassant.
Avec plus de 100 000 installations réussies et plus de 10 ans d'améliorations constantes, nous avons perfectionné nos dalles de rétention de gravier. Durant cette période, nous avons introduit des parois cellulaires épaisses, nervurées de 3,5 mm et un nouveau treillis inférieur renforcé en forme de X pour empêcher la migration des pierres vers le bas. Associé à une membrane à dérouler rapide en dessous pour le système anti-migration de gravier le plus efficace de l'industrie.
Le résultat est un système de maille de renforcement de gravier d'une efficacité unique qui est extrêmement durable tout en restant simple à installer. Les professionnels du bâtiment en Europe et au-delà les qualifient de "meilleures dalles stabilisatrices en plastique qu'ils aient jamais utilisées".
À utiliser pour les aires de stationnement en gravier, notre système de dalle plastique pour parking/allée possède toute la résistance du béton et du bitume (charges d'essieu de 25 tonnes). Les tapis de gravier IBRAN améliorent le drainage de votre surface en gravier stabilisé, évacuant rapidement l'eau de pluie vers le sol, prévenant les inondations.
Suffisamment grandes (4 par mètre carré) pour rendre l'installation rapide et facile, suffisamment petites pour éviter les déchets excessifs. Notre système de dalle plastique pour allée en gravier rend les projets de revêtement perméable rapides et économiques. Cela les rend même très efficaces en termes de temps, de main-d'œuvre et de coûts dans des applications plus commerciales. Lorsqu'elles sont correctement installées, nos dalles stabilisatrices résisteront à l'épreuve du temps.
Elles constituent la solution écologique parfaite pour prévenir la migration du gravier, même sur des pentes allant jusqu'à 25% !
- Entièrement perméables, solution de drainage efficace (conforme SuDS)
- Couvre rapidement de grandes surfaces (500mm x 500mm x 40mm)
- Stabilise le gravier angulaire ou décoratif de 5 à 35mm.
- Dalles emboîtables rapides à clipser pour une installation rapide.
- Capacité portante élevée : convient aux voitures, VUL/PL et véhicules d'urgence (jusqu'à 500 tonnes par mètre carré).
- Fabriquées en Europe par IBRAN à partir de matériaux 100% recyclés de haute qualité.
- Résistant aux UV et au gel (-50ºC à +90ºC)
- Conforme à la Partie M (accessible aux fauteuils roulants)
- Convient à une large gamme d'applications domestiques ou commerciales légères à intensives.
- Garantie long terme de 25 ans (sous réserve d'une installation documentée - voir notre guide d'installation)
Spécifications complètes ci-dessous.
Dalles Stabilisatrices Specifications
| Dimensions: | 500mm x 500mm x 40mm |
| Grid Coverage: | 4 grids/m2 |
| Ribbed Wall Thickness: | 3.5mm |
| Colour: | Black (others available on request) |
| Cellular Space: | 68mm x 68mm Squares |
| Weight: | 860g/grid |
| Compression Resistance: | 500 tonnes per sqm |
| Axle Load Capacity: | 25 tonnes |
| Material: | 100% recycled PP/HDPE |
| Temperature Stability: | -50ºC to +90ºC |
| Recommended Fill: | 5-35mm Angular/Decorative Gravel |
| Environmental: | None toxic, chemically inert & reusable |
| Slope Tolerance: | 25% / 15º |
| Compliance: | SuDS & Part M Compliant |
| Nature: | Tree Safe |
Customer Reviews
Had 115 units delivered well packaged feel good quality just waiting for the good weather to lay
Done some research on drive grids. These were not the cheapest or the dearest and further research provided enough information to select these. Not a small order at just under 400 tiles, approximately 98m2. ordering went smooth, as did the delivery, on time and with no damage to any tile. the wife laid all the whole ones in 3 minutes short of 2 hrs whilst I cut and fitted the edge ones where needed. Very straightforward to lay and the cutting was done with a cordless circular saw. Once laid they were filled with 10 tons of 10mm clean stone, a whacker plate used to settle the surface. I have already recommended them to a friend who has a parking spot to sort out. The job went as well as expected and would recommend them.
Excellent grids
Quick and simple to install
Choice of colour
Cut well with a diamond blade grinder.
Arrived on time , great quality and had just enough due to their coverage calculator
Great product and grids are so easy to use even for a novice like me! The hardest part is the levelling off then just place the grids fill with gravel and you have an amazing drive/path
Highly recommended and product delivered within 2/3 days if not next day
IBRAN-X gravel grids stabilise gravel on any site.
IBRAN-X is the most versatile, heavy duty, plastic gravel grid system. Free draining and having incredibly high load capacity (500 tonnes/square metre), they are strong enough for any low cost gravel driveway, footpath, access road or commercial and industrial car parking.
Incredible load capacity - up to 500 tonnes per square metre!
At 500mm x 500mm x 40mm, you can quickly assemble up to 360m2 per hour, with minimal waste and minimal effort. The lightweight (860g per tile) but ultra heavy duty (500T/m2 load capacity) grid structure is fortified with UV stabilisers and an impact modifier which makes the grids unbelievably durable. And what's more, they're sustainably made, right here in the UK, from recycled plastic!
Careful design tailored for the trade.
We have continuously improved our gravel grid system over the past 10 years, refining the design based on feedback from the trade. During this time, we've supported over 100,000 projects with IBRAN-X. The trade love IBRAN-X for:
- Rapid installation - quickly cover large areas with less waste from cuts.
- Interlocking - making it strong for vehicular use, even on slopes.
- X shaped mesh - stops the stone from escaping beneath and forcing the grids upwards.
- Impact modified - our blend of plastic contains an additive which prevents shattering.
Install on any site to create wheelchair friendly parking areas, heavy duty access roads, gravel driveways and footpaths. IBRAN gravel parking grids make creating the perfect driveway quick and easy. You can fill IBRAN-X grids with any rough or smooth 5-35mm gravel or stone and it will bed into the cells of the gravel grids perfectly.
Made sustainably, with recycled plastics.
Surpassing industry standards and designed with the trade in mind, the IBRAN-X design incorporates all the features our customers have requested. As a sustainable manufacturer, our aim is to produce products that perform to the highest of standards because products that aren't up to the job, aren't sustainable.
And in line with our business goals of sustainability, the grids are the perfect size to be quick to install, without the need for large, wasteful offcuts. This saves you money and saves the environment!
Premium quality for low cost.
We are one of the few true gravel grid manufacturers in the UK. We do not import any of our products, including our gravel stabilisation grids. Every single heavy duty gravel grid is made in-house and shipped directly from our factory within 24 hours of passing our quality checks.
Removing layers of unnecessary handling is how we are able to provide premium quality gravel grids at a fantastic price.
Install IBRAN gravel parking grids anywhere for enduring quality.
Thousands of successful projects to date.
We could give you hundreds of reasons to buy from IBRAN but we believe that our customers' opinions could tell you more than we ever could.
With over 10 years of experience and 100,000+ successful projects, we're confident you'll love working with us.
Don't just take our word for it though. Read what our customers have to say.
What is IBRAN-X?
IBRAN-X is a high-strength permeable paving grid system designed for gravel retention and ground reinforcement. Made from PP (polypropylene) and HDPE (high-density polyethylene), it creates stable, permeable surfaces for driveways, parking areas, and many other applications.
The unique cell design prevents gravel migration while allowing natural drainage.
Can you cut gravel grids?
Most plastic gravel grids can be cut to fit any shape or size of area, with the offcuts usually able to be recycled.
The larger the grid, the larger the offcuts can be. The smaller the grid, the more labour is involved in installing them - especially if they are interlocking grids. Our design sits in the sweet spot.
500mm square grids are considered the gold standard, and as such our grid is designed to this specification.
What are the benefits of using IBRAN-X?
IBRAN-X gravel grids offer multiple benefits:
- Exceptional strength (tested to 500 tonnes per square metre)
- 100% permeability for SuDS compliance
- Minimal maintenance requirements
- Rapid installation using our interlocking system
- UV stability to prevent degradation
- Eco-friendly construction using recycled materials
- Prevents gravel migration
- Eliminates rutting
- Creates wheelchair-friendly surfaces when properly installed
What vehicles can drive on IBRAN-X Gravel Grids?
IBRAN-X has been independently tested to withstand loads of up to 500 tonnes per square metre, making it suitable for everything from domestic vehicles to heavy goods vehicles.
This makes it ideal for:
- Residential driveways
- Commercial parking lots
- Emergency access routes
- Industrial applications
What kind of stone should be used with IBRAN-X?
For optimal performance, we recommend using 20mm angular gravel with IBRAN-X grids. However, the system can accommodate aggregates between 5mm and 30mm.
Angular gravel is preferred over rounded as it locks together better, creating a more stable surface.
For driveways specifically, 20mm angular gravel provides the best balance of stability and drainage while being less likely to get caught in tire treads.
How are IBRAN-X grids installed?
Installation follows these key steps:
- Excavate to the required depth (typically 150-300mm depending on application)
- Install a geotextile membrane to prevent upward migration of sub-base materials
- Add and compact Type 1 or Type 3 sub-base to the required depth
- Add a thin laying course of 10-20mm sharp sand or granite dust
- Lay IBRAN-X grids, connecting them using the interlocking system
- Fill with chosen aggregate
For detailed instructions, please consult our installation guide.
Is there a guarantee with IBRAN-X?
Yes - provided you can provide evidence of having followed our installation guide, then we offer a 15 year guarantee.
Is IBRAN-X Gravel Grids SuDS Compliant?
Our gravel grids are 100% permeable, making them one of the best Sustainable Urban Drainage Solutions.
Is IBRAN-X Wheelchair Friendly?
In the UK, there are no documents or set standards for approval of our system except for the government's own guidance, known as Part M.
To be part M compliant, the surfacing choice needs to demonstrably smooth enough to allow a wheelchair user to manoeuvre their wheelchair, whilst supporting their weight.
Using IBRAN gravel grids is the only way to make a gravel surface suitable wheelchair friendly.
This video demonstrates the ease of wheelchair use: demonstration video.
Is IBRAN ISO-9001 certified?
Yes, ISO-9001 is just one of the many certifications we are proud to carry as a manufacturer.
What are gravel stabilisation grids?
Gravel stabilisation grids are a type of ground reinforcement system made from PP (polypropylene) and HDPE (high-density polyethylene). They are used to create a stable, permeable, and aesthetically pleasing surface for a variety of applications, including driveways, walkways, and landscaping.
The grids are made up of a series of interlocking cells that hold the gravel in place, preventing it from shifting and moving underfoot.
What are the benefits of using gravel stabilisation grids?
There are many benefits to using gravel stabilisation grids, including:
- Stability: By preventing the gravel from spreading, they ensure a consistently stable and level surface
- Permeability: By allowing the passage of water, they reduce runoff, which reduces flooding in built-up areas by allowing for natural drainage
- Durability: The combination of PP and HDPE materials creates a robust system that is resistant to rot, decay, and pests
- Aesthetics: Gravel stabilisation grids can be used to create a variety of different patterns and designs
- Low maintenance: Once installed, gravel stabilisation grids require very little maintenance
Can I use gravel stabilisation grids on all types of ground?
Gravel stabilisation grids can be used on a variety of different ground types, including clay, sand, and gravel. However, it is crucial to ensure that the ground is properly prepared with a stable, compacted sub-base before installation. This foundation work is essential for the long-term performance of the system.
How long do gravel stabilisation grids last?
Gravel stabilisation grids made from PP and HDPE materials are extremely durable and can last for many years. However, the lifespan of the grid will depend on:
- The specific application
- The quality of installation and sub-base preparation
- The amount of traffic it receives
Do I need planning permission to install gravel stabilisation grids?
In most cases, you will not need planning permission to install gravel stabilisation grids. However, it is always best to check with your local planning authority to be sure.
How much do gravel stabilisation grids cost?
The cost of gravel stabilisation grids will vary depending on the size of the area you need to cover and the specific type of grid you choose. However, they are generally a cost-effective solution for creating a stable and durable gravel surface.
Additional Applications & Suggested Uses
Our versatile product can support a much wider range of applications.
Eco-friendly, sustainable grass and gravel paving and structural support solutions.
- Ground stability grids installed at ground level to prevent soil disruption from vehicle and foot traffic.
- Access roads and emergency service lanes (e.g., fire and ambulance routes)
- Driveway grids and gravel parking
- Grass or gravel car parks, including temporary and permanent overflow parking Reinforcement for residential driveways, lawns, and gravel parking
- Surface drainage solutions for stormwater management and flood control
- Safe water runoff solutions and French drains Stability for railway embankments
- Slope and embankment reinforcement
- Drainage and melioration ditches
- Use for horse paddocks, ménages, and arenas
- Buggy paths and disability access routes
- Golf course pathways and grass stabilisation
- School play areas and access routes
- Flooring for events and marquees
- Lawn protection for sloped gardens
Haili Branson
OnlineTrusted by Industry Leaders
Why IBRAN Gravel Grids Are the Smart Choice for the Trade
When your name’s on the job, every material you use reflects your standard. That’s why tradespeople across the UK trust IBRAN — because our gravel grids are purpose-built to outperform the bulkier alternatives that claim to save time, but often don’t hold up in the real world.
Unlike oversized membrane-backed grids, which flex under load and waste materials with awkward offcuts and fragile joins, IBRAN delivers a trade-ready solution designed for speed, strength and zero compromise:
- Compact, modular format means faster handling, easier cutting, and less waste on-site. No wrestling oversized 2 m panels or binning offcut strips — just efficient coverage with no excess plastic.
- Cross-mesh tray base locks gravel in place, stopping stone from migrating underneath and eliminating uplift — something membranes simply can’t do once pierced by aggregate or settled unevenly.
- Impact-modified, 100% recycled polypropylene resists cracking, snapping, or cold-weather brittleness — far more durable than brittle honeycomb cells with thin vertical walls and non-structural textiles.
- Push-fit from above for rapid install — lay hundreds of square metres per hour, solo or as a crew, with instant interlock and minimal prep.
- Fully compatible with IBRAN edging and accessories, so you can roll from prep to finish without delays, workarounds or mismatched systems.
IBRAN grids aren't over-engineered for show: they’re built smart to give you faster installs, tighter finishes, and fewer callbacks. And because there’s no fragile membrane stitched to the base, what you lay stays put.
Install it once. No flex, no fuss, no failures.
Eco-friendly Solutions
Not only are IBRAN gravel grids easy to install and versatile, but they also have environmental benefits. Our plastic gravel grids are 100% recycled and made in the UK, lowering our carbon footprint in manufacturing and transport.
Here are just a few other benefits:
Erosion Control: By stabilising the soil, driveway gravel grids help prevent erosion caused by heavy rains, protecting surrounding vegetation and landscapes.
Stormwater Management: Gravel grids allow rainwater to permeate through the surface. This can help prevent flooding and erosion.
Reduce Surface Heat: Unlike traditional pavement, gravel grids can help lower surface temperatures, creating cooler environments.
Easy Installation
IBRAN gravel grids are easy to install.The porous layers seamlessly interlock to hold all kinds of stone (10 - 30mm). Pave across on any smooth surface, even at a 25% gradient!
- Place the grids on a Type 1, 2, or 3 MOT sub-base or any well-compacted, smooth surface.
- Blind the sub base with a screed layer of sharp sand, covered with permeable membrane.
- Interlock the grids and fill them with bulk bags of stone.
This combination will keep both the grids and gravel in place, creating a solid, rut-free surface for driving.
Expect your new plastic gravel grids to last over 25 years, with minimal maintenance.
